Highest quality for your skill

CYBERSTONE

CYBERSTONE is the new generation robotized production system with 6/7/8 interpolated axes, designed to be a highly flexible tool for the performance of elements and objects of any size and material with heights up to 3300 mm. It is particularly suitable for sculptures, rectilinear, concave, convex, arched, elliptic shapes, single or incremental pass and excavations of two-dimensional and three-dimensional section blocks; it is also suitable for the execution of oblique, circular, elliptical cuts, inclined up to a thickness of 260 mm. Thanks to the rotating platform, it is possible to work the piece at 360 ° without moving or repositioning it for the working shots. Its mobile arm with 6 interpolated axes allows to perform 180 ° undercuts; the ISO 50 connection allows the use of diamond tools of different types, such as drills, grinding wheels, wheels for rebates, finger bits, shaping tips and cutting discs with diameter 650 or 850 mm.

This robot allows to make extremely precise finishing and to create sinks, tubs, tables, chairs, shower trays, vases, statues, columns and other architectural elements in general. CYBERSTONE meets the most demanding requirements, maximizes productivity, and, thanks to the numerous accessories, can be set up as a working center for single pieces of any size or for mass production.

Main features
  • Freely combinable modular system
  • Simple and easy to program
  • Wide range of work processes
  • Reduced space required
  • Extremely powerful
  • Ideal for shaping
  • Dedicated and optimised software interface
Production gallery
Technical schedule
Max number of interpolated axes 6/7/8
Maximum cutting depth mm 260
Blade rotation with inverter rpm 6000 rpm
Type of tool-holder ISO 50
Nominal power rating kW 28
Max. Range of action mm 3326
Installed power kW 30
Protection rating IP 65
Standard frequency voltage V/Hz 400V 50Hz 4p+N
Capacity at wrist kg 420
Minimum blade diameter mm 350
Maximum disc diameter mm 825
Approx. total weight of the machine kg 2686
Types of processing
Longitudinal cuts
Transverse cuts
Oblique cuts
Inclined cuts 0°-90°
Drilling
Orthogonal cuts
Circular cuts
Shaping
Excavation of blocks
Statues

Components

Linear interpolated motion system allowing the robot to move linearly by 2500 mm, thus increasing the work area and granting a better working position to the machine. Built in metal structural work using linear recirculating ball guides and precision racks for handling, all covered by bellows.
Electrospindle with liquid cooling system 20 KW/S6 - RPM adjustment from 0 to 6000 rpm with inverter - ISO 50 tool connection - Automatic tool change - Tool cooling system through internal water passage.
Linear tool storage at 10 positions for ISO 50 cones with max. length 600 mm, complete with pneumatic- lifting stainless steel cover.
Cyberstone is equipped with an 8.4 "anti-reflective touch-screen smart-Pad allowing to move outside and inside the working area. A simple and intuitive device to check all the processes and to manually control the robot. It is equipped with a key and a start button, preventing it from being switched on accidentally, thus granting maximum safety for the operator. On the side a 6D mouse is integrated, to manage the machine and its setting. The operator can display the most frequently used information and check the status of production in real time.
Tool thickness detector, essential for precise processing.
Available in different sizes with a diagonal passage from 850 to 1400 mm, built in steel structural work, with axis rotation controlled by NC, brushless motor and high precision gearbox, to be installed on the ground or on the platform; specifically conceived for the performance of circular section columns, with simple and complex shapes.
Turntable with interpolated axis, made of steel with aluminum surface, capacity up to 15000 kg. Table diameter 1200 mm - Max load diameter 2000 mm.
Revolving table with 4 worktops for mass production of small or medium-sized pieces. The main table rotates and places the plate in the predefined working area. Once in position, the plate is interpolated to the Cyberstone CNC in order to manage the processing as a normal turntable.

Software

The CAD-CAM software allows you to design, import and execute 2D and 3D files in DXF, IGES, STL, PNT, STEP and RHINO formats and to define surfaces and shapes using laser scanning.
The interface connects and integrates CAD-CAM and Eureka automatically with the KUKA.CNC and the tool database of the various forms of software, reducing programming times even further.
It allows the robot movements to be elaborated and the work process course to be simulated in all its stages, highlighting any collisions and particular points and also generates the ISO work process file which will subsequently be imported onto the interface and KUKA.CNC.